3D Printer Forum banner
1 - 2 of 14 Posts

· Registered
Joined
·
11 Posts
@Rincewind
I live in an apartment and my shop is a 12' x 35' bay in a self storage unit attached on all 3 sides. Steel, steel and more steel with 16' roof line. VERY Hot in summer. Also have to drive almost 5 miles each way. Wanted a shop and now I have one. Everything works off of a single quad outlet 20A total. I made the worlds largest extension cord and I never have to use any other. Made it with quad outlets every 10' on both side walls. I am alone in there but still have to remain aware of pretty much one machine at a time.
If you want a shop bad enough you can always find a way.
 

· Registered
Joined
·
11 Posts
@Rincewind
For the price, I couldnt think of any other alternative than a self storage unit. I have done that before while living on my boat for around 30 years or so. My rent is $200/mo. Some of the older self-storage locations allow it and the newer ones do not.
No heat, no AC and only one 20A outlet. Wheel Tire Wood Asphalt Shade
Wood Floor Asphalt Brickwork Gas
Building Wood Gas Engineering Machine
Automotive design Gas Wood Machine Engineering
 
1 - 2 of 14 Posts
Top